Industry's Lowest-Power FPGAs
The Actel IGLOO families, which include IGLOO/e, IGLOO nano, and IGLOO PLUS devices, are reprogrammable, full-featured flash FPGAs designed to meet the demanding power and area requirements of today's portable and power-conscious electronics. Based on Actel nonvolatile flash technology and single-chip ProASIC®3/E FPGA architecture, the 1.2 V / 1.5 V operating voltage family offers the industry's lowest power consumption, smallest footprint, and competitive prices.
The IGLOO families support up to 3 million system gates with up to 504 kbits of true dual-port SRAM, up to 6 embedded PLLs, and up to 620 user I/Os. Low-power applications that require 32-bit processing can use the ARM® Cortex™-M1 processor without license fee or royalties in M1 IGLOO devices. Developed specifically for implementation in FPGAs, Cortex-M1 offers an optimal balance between performance and size to minimize power consumption.
Key Features
- Ultra-low power in Flash*Freeze mode
- Low power active capability
- Variety of small footprint packages as small as 3x3 mm
- Many products under $0.99
- Known good die supported
- Reprogrammable flash technology
- 1.2 V to 1.5 V operation
- High capacity, advanced I/Os
- Clock conditioning circuit (CCCs) and PLLs
- Embedded SRAM and nonvolatile memory (NVM)
- In-system programming (ISP) and security
The IGLOO series includes:
Device Comparison
| IGLOO Family |
IGLOO/e |
IGLOO nano |
IGLOO PLUS |
| ARM-Enabled |
M1 IGLOO/e |
|
|
| Overview |
The ultra-low-power, programmable solution |
The industry's lowest-power, smallest-size solution |
The low-power FPGA with enhanced I/O capabilities |
| System Gates |
15 k - 3 M |
10 k - 250 k |
30 k - 125 k |
| Max User I/Os |
620 |
71 |
212 |
| Power Consumption |
5 µW |
2 µW |
5 µW |
The Flash*Freeze technology used in IGLOO devices enables easy entry and
exit from ultra-low power mode, which consumes as little as 2 µW,
while retaining SRAM and register data. Flash*Freeze technology simplifies
power management through I/O and clock management without a need to turn
off voltages, I/Os, or clocks at the system level.
In Flash*Freeze mode, power drops to as low as 2 µW, and no additional
components are required to turn off I/Os or clocks while preserving the
design information, SRAM content, and registers. I/Os can maintain
their state during Flash*Freeze mode. Entering and exiting
Flash*Freeze mode takes less than 1 µs.
Additionally, the Low Power Active capability (static idle) allows for
ultra-low power consumption while
the IGLOO device is completely functional in the system by maintaining
I/Os, SRAM, registers, and logic functions. I/Os can maintain their
state during Flash*Freeze mode. This allows the IGLOO device to control
the system power management based on external inputs (e.g., scanning for
keyboard stimulus) while consuming minimal power.
Actel IGLOO devices can provide more than ten times the battery life of their
nearest low-power competitor.
Actel
IGLOO FPGAs are true single-chip devices, do not require configuration or
other support components, and offer a variety of small-footprint packages
with high I/O pin count to match design needs.
The Actel IGLOO family is offered in a small form factor (3x3, 4x4, 5x5, 6x6,
and 8x8 mm), high-density, chip-scale package and quad flat no-lead package.
Search for available IP Cores for each IGLOO device:
| Technology Solutions |
 |
IGLOO devices offer Flash*Freeze technology and the lowest static power,
sleep mode power, and dynamic power consumption, achieving the lowest
system power. The IGLOO family of FPGAs maximizes power savings with
very limited power-on current surge and no high-current transition
period, both of which occur on many FPGAs. » More |
| Small Footprint |
Wide selection of small size packages optimize logic and I/O design
needs while minimizing board size. |
| Low
Cost |
With many devices under $0.99, IGLOO devices offer industry-leading
unit cost and the lowest total system cost. » More |
 |
Does not require additional nonvolatile memory in order
to load the device configuration data at every system power-up, which
reduces cost and increases security and system reliability. |
 |
Greatly simplifies system design, making the device available to
perform critical system setup tasks and reducing bill-of-materials
costs and PCB area. » More |
 |
Utilizes a 128-bit flash-based lock and inherent flash technology
features, providing the most impenetrable security for programmable
logic designs. » More |
 |
Flash cell configuration element cannot be altered by high-energy
neutrons and is therefore immune, unlike SRAM-based FPGAs. » More |
| Secure
ISP |
Supports a built-in AES decryption engine and industry-leading flash-based
AES-128 key for secure remote field updates over public networks with
encrypted bitstream. |
| User Nonvolatile Memory |
1,024 bits of on-chip, user-accessible, nonvolatile FlashROM can
be used in diverse system applications. |
| ARM® Cortex™-M1
Processor |
Uses industry-standard FPGA-optimized Cortex-M1 with no upfront licensing
fees and royalties. » More |
Portable Applications
IGLOO
low-power flash FPGAs are ideal for the portable market—offering low
active and static power consumption, ultra-low power mode support, small footprint
packages, and low cost. Combined with reprogrammability and high-end features,
Actel enables fast time-to-market with turnkey low-power solutions.
Actel IGLOO FPGAs address the portable market needs in consumer, industrial,
medical, automotive, computing, communications, and military and aerospace.
To learn more about Actel's offering in the portable market, refer to the Portable Solutions web page.
A wide variety of LCD displays with rapidly changing display technologies are available in the market. To meet the needs of short design cycle time to integrate newer display devices, Actel offers a wide range of flexible Display Solutions with IGLOO ultra-low-power flash FPGAs.
Solutions
Actel offers the optimal solution for your portable design with its FPGAs, design solutions, and intellectual properties (IP). Validated and proven solutions and IP enable quick development of portable designs with solutions supporting storage, display and imaging, and human machine interface, and miniature motor controls.
Actel IGLOO devices can manage interfaces between the VLIO or
AMBA bus and the different types of storage devices.
To learn more about Actel's solutions, visit one of the following:
Libero® Integrated Design Environment (IDE) is Actel's comprehensive software toolset for designing with IGLOO devices, enabling you to quickly manage and optimize your design to its lowest power capabilities and further reduce power consumption using automatic power-driven layout (PDL). Libero IDE's next generation SmartDesign tool ensures fast time-to-market with its advanced features for creation of simple designs or complex processor-based and bus-based designs. Libero IDE also includes cutting edge power analysis capability with SmartPower, which identifies specific points in the design where power can be reduced.
Actel's SoftConsole is a free software development environment, enabling the rapid production of C and C++ executables for ARM Cortex-M1 processors, and is compatible with the Libero IDE design flow.
ProASIC3 designs can be migrated to attain the low-power benefits of IGLOO devices, or new designs can be created from the start. Learn more about Libero IDE flows and tools.
IGLOO Starter Kits provide complete evaluation solutions and demonstrate the ultra-low power of Actel IGLOO and ARM Cortex-M1-enabled IGLOO devices. They are low-cost, RoHS-compliant, and include a development board, Libero IDE software, on-board programmer, and other resources. The detailed current-monitoring capabilities of the starter kit allow you to directly measure this low current consumption and validate your design's performance when using IGLOO devices.
The IGLOO Icicle Kit is a modular, low-cost, portable, fully RoHS-compliant demonstration platform powered by built-in rechargeable lithium-ion battery, USB cable, or external power. The kit includes the evaulation board, FlashPro3 programmer built into a low-cost programming stick (LCPS), Libero IDE software, and other resources. The kit is ideal for testing the operation of signals, device interactions, and system functions during Flash*Freeze mode.
FlashPro3 is
the ideal low-cost programmer for in-system programming of IGLOO devices.
Up to 15 of these programmers may be cascaded in parallel via powered USB hubs
to give a volume ISP solution for pre-assembled boards featuring IGLOO
devices.
Silicon Sculptor
3 programmer is the ideal engineering pre-programmer for IGLOO devices,
where each device can be programmed without having it assembled into
a PCB. The Silicon Sculptor 3 includes a high-speed USB 2.0 interface
that allows a customer to connect as many as 12 programmers to a single
PC.
Identify Actel Edition (AE) logic analysis software from Synplicity® provides embedded debug capbilities for IGLOO devices. It is included in the Libero IDE Windows DVD or is available for download.
